Blast from the past. The original #BoldportClub; was project #1, March 2016! ;)
Contributed by @boldport on Feb 15, 2019
Pease Project Page
Pease, second edition (Project #1, March 16)
This kit is the very first Boldport Club project. It's a tribute to Bob Pease, a legendary analogue designer, with the circuit based around the LM331, 'voltage to frequency converter' that he designed. All the components for the circuit in Figure 20 of the datasheet: light intensity to frequency converter are provided. Alternatively, surface-mount components can be used (not provided in the kit).
Posts from Club Members about the project..
That should keep me going for a while. So pleased I managed to get my hands on all these beautifully designed proje…
Contributed by @swinders on Jan 16, 2019
A box from @boldport has arrived, must be my latest #BoldportClub projects... 😋
Contributed by @swinders on Jan 16, 2019
@boldport Taken whilst rearranging my Boldport Club drawer
Contributed by @Hossomatic on Jul 24, 2018
#BoldportClub Bonus: A couple of orphaned PCBs for me to tinker with. 😊
Contributed by @thilographie_de on Nov 22, 2017
Boldport #1, Pease - scanlime:008
Contributed by @scanlime on Feb 19, 2017
Quote from YouTube: I jumped at the opportunity to get hardware in the mail from another like-minded art hacker. In this video I’ll unbox the kit, assemble it delicately, and finally I’ll have to make some squiggles and beeps with it.
Relax, Pease, relax! #BoldportClub
Contributed by @boldport on Feb 9, 2017
Relax, Pease, relax! #BoldportClub https://t.co/QCLYQ3AOn6
Boldport Club Project 1 'Pease' using SMD components.
Contributed by @Loph on Jan 13, 2017
I subscribed to the Boldport Club in March 2016, just in time to get the Cordwood Puzzle. The Pease kit was sold out in the store by then, so I was happy to be able to get the bare board as part of the ‘Just less than perfect bundle 1’. :) Here’s the imgur album that I made during the build and a video of it functioning:
LEAP#276: Variable Speed Runway LEDs (inspired by the Pease)
Contributed by @tardate on Dec 1, 2016
in the vein of “now I have a hammer, everything looks like a nail” …I found a new application of the LM331! I was introduced to the LM331 when I built the Pease project. I wanted to drive some variable-frequency LED effects without taxing the MCU. Many ways of doing this, but my solution uses the LM331. This is just a small part of a larger project (hence my desire for no processor overhead). My full build notes are in the LittleArduinoProjects repo. Sneak peek:
#BoldportClub project 1 (Pease) made with SMD components! @verdugow @annaglz @boldport
Contributed by @Lophification on Nov 9, 2016
#BoldportClub project 1 (Pease) made with SMD components! @verdugow @annaglz @boldport https://t.co/H0TxBeOgBk
LEAP#256: dialing back the #BoldportClub Pease #1 to a low-frequency light-dependent blinky.
Contributed by @tardate on Oct 15, 2016
dialing back the #BoldportClub Pease #1 to a low-frequency light-dependent blinky. I joined the Boldport Club rather late, and missed out on the original Pease kit (now out of stock). But I did manage to snaffle the PCB in sale of “Just Less the Perfect” boards. My full build notes are in the LittleArduinoProjects repo.
Ladyada assembles @boldport project #1 #DeskofLadyada @adafruit 3/19/16
Contributed by Adafruit Industries on Mar 18, 2016
Ladyada assembles @boldport project #1 #DeskofLadyada @adafruit 3/19/16
Beautifully presented and a nice big sticker for the laptop lid ;) thanks @boldport club #BoldportClub
Contributed by @rabid_inventor on Mar 12, 2016
Beautifully presented and a nice big sticker for the laptop lid ;) thanks @boldport club #BoldportClub https://t.co/6gvIbxP4mA
Get one of these while you can...
Contributed by @boldport on Feb 26, 2016
Get one of these while you can… https://t.co/XQn2HLDXbg #BoldportClub https://t.co/eZ0RCELwzV
Unveiling Boldport Club Project #1!
Contributed by @boldport on Feb 24, 2016
Unveiling Boldport Club Project #1! https://t.co/wOrM33hz8n https://t.co/AOWdMd1gpH #BoldportClub https://t.co/DDJvWYl1FV
Remember this? I'm going to make another edition for the #BoldportClub
Contributed by @boldport on Jan 13, 2016
Remember this? I’m going to make another edition for the #BoldportClub https://t.co/Pr5vlMhj1g https://t.co/Vsadl8Pwdr
Looking for inspiration? Check out these project builds shared by Club Members..
Boldport #1, Pease - scanlime:008
Contributed by @scanlime on Feb 19, 2017Boldport Club Project 1 'Pease' using SMD components.
Contributed by @Loph on Jan 13, 2017LEAP#276: Variable Speed Runway LEDs (inspired by the Pease)
Contributed by @tardate on Dec 1, 2016LEAP#256: dialing back the #BoldportClub Pease #1 to a low-frequency light-dependent blinky.
Contributed by @tardate on Oct 15, 2016Ladyada assembles @boldport project #1 #DeskofLadyada @adafruit 3/19/16
Contributed by Adafruit Industries on Mar 18, 2016
Supporting resources shared by Club Members for this project..
LEAP#256: dialing back the #BoldportClub Pease #1 to a low-frequency light-dependent blinky.
Contributed by @tardate on Oct 15, 2016Boldport is all about beautiful boards. Take a look..
