That should keep me going for a while. So pleased I managed to get my hands on all these beautifully designed proje…
Contributed by @swinders on Jan 16, 2019
3x7 Project Page
3x7 (Project #28, September 18)
Seven segment displays are and have been very common in electronics. Usually, they are the 'seven segments' are encapsulated into a single components, with a common anode or cathode and seven (sometimes eight for a dot) control lines. This projects lets you construct three digit seven segment display from discrete components. The LEDs themselves shine though a thin 1mm PCB.
Posts from Club Members about the project..
A box from @boldport has arrived, must be my latest #BoldportClub projects... 😋
Contributed by @swinders on Jan 16, 2019
Another view of my free-wired temperature and humidity sensor based on #BoldportClub boards and as seen…
Contributed by @FalkoThiele on Oct 27, 2018
Thanks #BoldportClub for bringing beautiful circuitry to my inbox each month.
Contributed by @FalkoThiele on Oct 27, 2018
Weekend project: Free wire a #BoldportClub micro controller board The Cuttle with a hand made 3x7 segment LED displ…
Contributed by @FalkoThiele on Oct 27, 2018
My new Pomodoro Timer - a #BoldportClub 3x7 wire sculpture inspired by the amazing work of @MohitBhoite LEAP#429
Contributed by @tardate on Oct 26, 2018
A Pomodoro Timer wire sculpture with the 3x7, and ATmega328 and the
LRThreeDigits
library.
All notes, schematics and code are in the LEAP repo on GitHub.
3D printed helper and lightmask for led placement (3x7)
Contributed by Mavu on Oct 19, 2018
This is a small STL file for printing with a 3D-printer.
It helps to align and hold the LEDs in place while solering, and acts as a light-mask to shield the led from their neighbours if you leave it in place.
Download the 3x7_helper.stl file here
The #BoldportClub 3x7 custom pop-top! I figure this is kind of what a @saardrimer and @MohitBhoite collab would look like LEAP#425
Contributed by @tardate on Oct 18, 2018
The 3x7 custom flip-top!
All my notes on the build are available here
Another @boldport #BoldportClub project successfully soldered.
Contributed by @Eyebeear on Oct 14, 2018
scanlime-in-progress - 3x7 (part 2)
Contributed by @scanlime on Oct 13, 2018
scanlime-in-progress gets to build the 3x7 over two massive streams…
scanlime-in-progress - 3x7 (part 1)
Contributed by @scanlime on Oct 13, 2018
scanlime-in-progress gets to build the 3x7 over two massive streams…
Wrestling with resistors well I never! Now I need a lie down... #BoldportClub @boldport
Contributed by @MrTomsWorld on Oct 9, 2018
Making good progress with the latest @boldport #BoldportClub project.
Contributed by @MrTomsWorld on Oct 7, 2018
Never thought that sewing PCBs together might actually be a thing. 😄 Smoke test went well, full function test later…
Contributed by @thilographie_de on Sep 23, 2018
Now that was fiddly. And I have a resistor left. 20+4 on the PCB are correct, though. Must be a spare.…
Contributed by @thilographie_de on Sep 23, 2018
3x7 Arduino Driver by Lucky Resistor
Contributed by @LuckyResistor on Sep 17, 2018
This is a very simple driver for the Boldport 3x7 project.
It is specifically written for Arduino UNO and compatible boards which use the ATmega328P chip and running at 16 MHz.
Source is available on GitHub
This month’s @Boldport project 3x7 is fun to build and that glow is so pretty! #BoldportClub
Contributed by @ThreeBytesFull on Sep 16, 2018
Happy Saturday! The latest @boldport #BoldportClub project has arrived.
Contributed by @MrTomsWorld on Sep 15, 2018
Final images of our next #BoldportClub project, '3X7'. Going out next week!
Contributed by @boldport on Sep 3, 2018
More shots of the #BoldportClub project '3X7' that's going out in the next couple of weeks.
Contributed by @boldport on Aug 31, 2018
New product shots of our next #BoldportClub projec, '3X7' :)
Contributed by @boldport on Aug 30, 2018
Working on a stress-free infographic text for '3X7'. #BoldportClub
Contributed by @boldport on Aug 8, 2018
Looking for inspiration? Check out these project builds shared by Club Members..
7-segment snake on @boldport 3×7
Contributed by @squeakbat on Nov 1, 2018
Another view of my free-wired temperature and humidity sensor based on #BoldportClub boards and as seen…
Contributed by @FalkoThiele on Oct 27, 2018
Thanks #BoldportClub for bringing beautiful circuitry to my inbox each month.
Contributed by @FalkoThiele on Oct 27, 2018
Weekend project: Free wire a #BoldportClub micro controller board The Cuttle with a hand made 3x7 segment LED displ…
Contributed by @FalkoThiele on Oct 27, 2018My new Pomodoro Timer - a #BoldportClub 3x7 wire sculpture inspired by the amazing work of @MohitBhoite LEAP#429
Contributed by @tardate on Oct 26, 2018
Boldport 3X7
Contributed by @MrTomsWorld on Oct 15, 2018
FIN! @boldport #BoldportClub
Contributed by @MrTomsWorld on Oct 15, 2018
Another @boldport #BoldportClub project successfully soldered.
Contributed by @Eyebeear on Oct 14, 2018scanlime-in-progress - 3x7 (part 2)
Contributed by @scanlime on Oct 13, 2018scanlime-in-progress - 3x7 (part 1)
Contributed by @scanlime on Oct 13, 2018
Wrestling with resistors well I never! Now I need a lie down... #BoldportClub @boldport
Contributed by @MrTomsWorld on Oct 9, 2018
Making good progress with the latest @boldport #BoldportClub project.
Contributed by @MrTomsWorld on Oct 7, 2018
@boldport thanks for another awesome #BoldportClub project!
Contributed by @kbx81 on Oct 6, 2018
Works. 😊 #BoldportClub 3X7
Contributed by @thilographie_de on Sep 23, 2018Now that was fiddly. And I have a resistor left. 20+4 on the PCB are correct, though. Must be a spare.…
Contributed by @thilographie_de on Sep 23, 2018
Already pretty tricky. #BoldportClub 3X7
Contributed by @thilographie_de on Sep 23, 2018
This month’s @Boldport project 3x7 is fun to build and that glow is so pretty! #BoldportClub
Contributed by @ThreeBytesFull on Sep 16, 2018
Supporting resources shared by Club Members for this project..
3D printed helper and lightmask for led placement (3x7)
Contributed by Mavu on Oct 19, 2018scanlime-in-progress - 3x7 (part 2)
Contributed by @scanlime on Oct 13, 2018scanlime-in-progress - 3x7 (part 1)
Contributed by @scanlime on Oct 13, 2018
3x7 Arduino Driver by Lucky Resistor
Contributed by @LuckyResistor on Sep 17, 2018Boldport is all about beautiful boards. Take a look..
